|
|
|
|
|
To print Judges Cards Labels select Judges Cards from the Tools Menu. The following dialog will be displayed...
This dialog allows you to select any combination of judges card labels to be printed by clicking and dragging or CTRL/clicking.
When you click OK the Label Options dialog is displayed...
All you need to do here is select Dot matrix or Laser and ink jet and click OK. The Print height scale modifier is normally set to 1.0. Some ink jet printers need this value to be set to 1.035. Other ink jet printers may work better with a different value. If you labels are not printing properly, you can adjust this value to correct the problem. Note: ShowPro supports AveryÒ 4013 tractor feed labels and AveryÒ 5161 Laser labels. When you select Dot matrix or Laser and ink jet you are essentially selecting one or the other of these labels types. ShowPro™ has been designed to permit other labels to be used in the future. If the current support does not meet your needs, let us know. If you selected Laser and ink jet you will have an opportunity to control which label on the sheet printing will start at. This avoids wasting any labels. |
When you click OK here your labels will begin printing.
If you selected Dot matrix labels you will see this...
When you click OK your labels will begin printing.